Product Description

89 Rotating Mounting Base

For Alignment Telescopes and Collimators

The model 89is a precision mounting base designed to accommodate almost all of our 2¼” diameter alignment telescopes and collimators. The instrument is supported by two wyes which are 8.375″ (212.7mm) on center, and are mounted to a channel-sectioned bar. (Special wye spacings are available on request.) The wyes provide stable support of the instrument barrel. For added protection, adjustable metal clips secure the telescope to the base.

Precise rotation in a horizontal plane is controlled by the patented Brunson ball bearing spindle, similar to that of all Brunson transits. The mounting base has a standard 3½”-8 internal thread for attachment to any compatible optical tooling stand. A fine motion tangent screw allows easy azimuth control, and incorporates a wobble pin for tension relief and a stable setup. Four large-headed leveling screws in nylon bushings make tilt adjustment easy. A level vial may be ordered as extra equipment.

Note: The original Brunson 89 had a wye spacing of 9½”, but was modified for the somewhat smaller spacing of 8.375″ in order to fit all of the K+E design alignment telescopes.

Specifications

Wye spacing:8.375″ (212.7mm), center-to-center
Approx. distance from bottom of base to centerline of a 2.250″ diameter telescope: 8.563″ (217.5mm)
Approx. weight:
Base, 14 lbs. (6.4 kg)
Shipping, 26 lbs. (11.8 kg)

May Be Used With

271 Tilt Collimator
272-15 Multiple Target Collimator
2022 family , 2024 family , 2062 , and C47280 Alignment Telescopes
81 and 83 alignment telescope families (discontinued)


Documents

English (PDF)


3D Model Downloads

3D IGES
3D PDF

View Site in Mobile | Classic
Share by: